DIY: Antique Flatware Rings

Posted on

Good morning, Thursday Crafthackers.

I have to say, I have always loved flatware rings. Whether it’s spoons or forks. There’s one catch though: they need to be silver. Which means you can check out your local antique stores or you can order them on Ebay. I’m using this tutorial from Kristen Danielle Designs as my reference.

So, you do need some specialty tools, but this is also a specialty DIY. You of course will need a sterling silver spoon or fork. A metal cutter, hacksaw or jewelry saw, file or sandpaper – coarse and fine, a dowel or ring mandrel, a paper and pen, a hammer or mallet (optional) and a butane torch (also optional but good for creme brule also). You’ll also have to decide what type of ring you want to make. You can make one that wraps up your finger, like so:

Or you can make one that wraps around itself, like so:

You can make whatever you like, you just need to make the wrap ring (the top image) a little longer.

When you’ve picked out which ring you want to make, pick out your cutlery and make sure it’s sterling silver – it will be stamped on the back of the spoon (900 or 925).

Next, measure your finger. You can do this by cutting a strip of paper and cutting it to measure or marking the overlap. If you’re doing a wrap ring, add an extra 1/4 inch for the overlap. If it’s the other type, you can just wrap it on itself.

For the next step you’ll need your saw or cutter. If you’re making a wrap ring, you’re going to want to cut the handle at the length you measured. The other ring, you can cut it just below the bowl of the spoon. File/sand the cut tend with a metal file or coarse grit sandpaper, and work your way down to fine grit sandpaper to get it super smooth so you don’t cut yourself or others.

Your next step is to bed the spoon. You can bend it around a dowel using the force of your muscles, you can hammer it around the dowel, or you can heat it with a butane torch before you bend. I would test which method works best for you.

If you are going to use a hammer, to avoid scratches, wrap the head of the hammer in a folded dishtowel. If you torch it, you’ll need to heat it for a little while, but don’t let it start glowing orange, that’s bad. The last step is to buff or polish the ring to get it to shine.

And voila, you have rings that you can give as gifts, or sell if you’re so inclined. Have fun!

~ Megan

 


Leave a Reply