DIY Spindle Windchimes

Posted on

Good morning Thursday Crafthackers!

Last week I posted on a DIY for sun catcher wind chimes. This week, I have a tutorial for you from Confessions of a Serial DIYer on making some wooden wind chimes, and the full tutorial can be visited here.

I love wooden wind chimes for a number of reasons, but the biggest is probably the sound. Its pretty unique and you can use different wood types and lengths to make different sounds. The other part of this tutorial that I love is that the tools and materials are very simple.

For this project you’ll need spray paint in the colours of your choice, spindles from old chairs (for a good size). You can also use wooden dowels in various lengths for different sounds, or cut these ones to varying lengths. You’ll need fishing line, scissors, a drill and a very small drill bit (the size just needs to be big enough to drill holes through the wood for the fishing line) and super glue. For the hanging base, you will need a round piece of wood like the one pictured, but you can find bases like this attached to lamps or candle holders at thrift stores, or you can just buy a round disk of wood to use to the same end. You’ll also need a metal ring, the size is up to you, but you will just need something to tie your fishing line to so that you can hang your chimes.  Your last thing is a topper. it isn’t necessary, but it can be something you find in a thrift store, or something at home you’d like to repurpose.

Your first step is to spray paint your wooden parts. Please do this in a well ventilated area outside, and give them some time to dry.

When they’re dry, your next step is to drill tiny holes horizontally at the top of each spindle. For safety, wear safety glasses and have a spare piece of wood underneath where you’re drilling to catch the drill bit. This should keep you and your furniture safe.

Next, mark and measure where the spindles will hang on your base.  They should be hanging around the base in a circle, and be more or less equidistant from each other along the outer rim. The tutorial writer sanded everything to antique it a little, but this is a step that you can skip if it isn’t your preference.

Next, you can thread your spindles. Cut enough fishing line for each of your spindles. Cut half of the lengths at 12 inches, and half at 24 (so if you have 8 spindles, you’ll be cutting 4 and 4).

Thread the sorter string through the hole in the spindle, and then thread both ends through the top of the disk. Tie the string so that there’s a knot big enough not to fall through. If your holes are a little too big, you can thread a button onto the end and tie the thread around the button so that you basically have an easy peasy stopper.

With your 24 inch thread, thread it through the spindle and tie a couple knots a few inches up from the spindle before pulling it through the holes in the top piece – this will keep them from pulling through the top  and you can use the same trick with the button if your holes are too big.. Try to keep them hanging at about the same length as the 12 inch pieces, and then tie them to the ring when they’ve been threaded through.

Next, use superglue to affix your topper, whatever you’ve chosen it to be. Hang in your garden and enjoy!

Happy Crafting,

~Megan

 


Leave a Reply